Koopmans Wood Rot Repair Agent 150 ml
Koopmans Wood Rot Repair Agent is a highly durable two-component repair product. This product is suitable for filling gaps in wood, steel, and concrete. It is an excellent wood rot filler but can also be used for bonding various materials or filling nail and screw holes. The Koopmans Wood Rot Repair Agent is best applied using a putty knife. This product is available in various packaging sizes.
Pros and Cons
- Does not shrink
- Almost odourless
- Does not absorb moisture
- Only suitable for small repairs
What is Koopmans Repair Agent used for?
It is highly suitable for small repairs up to 1 cm deep, such as screw and nail holes or minor wood rot issues. It is a solvent-free, fast-drying repair paste made of two-component epoxy resin for smaller restoration tasks.
What is the coverage of Koopmans Repair Agent?
The usage of Koopmans Repair Agent can vary and is not easily defined.
How should I apply Koopmans Repair Agent?
Press Koopmans Repair Agent firmly into the gap or damaged area using a putty knife. Then, smooth the wood filler using a wet putty knife. The layer thickness should be at least 10 mm.
Is Koopmans Repair Agent paintable?
Yes, Koopmans Repair Agent is fully paintable once dried.
More about this product
This high-quality professional wood rot repair kit/filler can be applied using any standard caulking gun. This tube contains a pre-measured two-component mix, so you don’t need to measure proportions manually. It guarantees ease and precision in application.
Key points about Koopmans Wood Rot Repair Agent
This product can be used for various applications, including:
- Wood rot repair filler
- Bonding wooden inserts
- Filling wood cracks
- Filling gaps in sheet material
Wood rot repair procedure:
- Remove rotten parts by chiselling or routing (at least 10 mm into healthy wood).
- Flatten the repair surface (max 0.5 mm).
- After curing fully (approx. 5 hours), sand the repair smooth.
Note: Use fine sandpaper (P220-P280) or Scotch Brite for the sanding process.
Wood bonding with inserts:
- Remove damaged or rotten parts by cutting.
- Prepare a new wooden piece to size (leaving a glue seam of approximately 5-7 mm). Treat the bonding areas and insert in place.
- Flatten the repair surface (max 0.5 mm).
- After curing fully (approx. 5 hours), sand the repair smooth.
Note: Use fine sandpaper (P220-P280) or Scotch Brite for the sanding process.
